1 / 9
Handle for Makita PJ7000 plate joiner — zdjęcie 1
1 / 9

Handle for Makita PJ7000 plate joiner

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Handle for the Makita PJ7000 plate joiner

Ocena
5 / 5
Polubienia
10
Pobrania
83
Wydruki
1
Wyświetlenia
683
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Handle for the Makita PJ7000 plate joiner which makes it more comfortable to use for me.

The handle is mounted with a M6x15 countersunk screw and a M6 locknut.

For mounting a hole with countersunk is needed, for the position see photo.

Filament: extrudr greentec pro (PETG, Nylon etc. should also be fine)

Print settings:

  • orientation: see picture
  • layer height: 0.16
  • wall loops: 4
  • Top/bottom layers: 6
  • infill: 30% gyroid
  • support: no

________________________________________________________________________________________________________________

Update 17.11.2023

Adjusted the handle(Griff_PJ7000 v16) that the 4mm plate can be installed.

Filament: PA6-GF30(not necessary, had to test this filament anyway)

Print settings: see above