1 / 9
Handle for Makita PJ7000 plate joiner — image 1
1 / 9

Handle for Makita PJ7000 plate joiner

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Handle for the Makita PJ7000 plate joiner

Rating
5 / 5
Likes
10
Downloads
83
Makes
1
Views
683
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Handle for the Makita PJ7000 plate joiner which makes it more comfortable to use for me.

The handle is mounted with a M6x15 countersunk screw and a M6 locknut.

For mounting a hole with countersunk is needed, for the position see photo.

Filament: extrudr greentec pro (PETG, Nylon etc. should also be fine)

Print settings:

  • orientation: see picture
  • layer height: 0.16
  • wall loops: 4
  • Top/bottom layers: 6
  • infill: 30% gyroid
  • support: no

________________________________________________________________________________________________________________

Update 17.11.2023

Adjusted the handle(Griff_PJ7000 v16) that the 4mm plate can be installed.

Filament: PA6-GF30(not necessary, had to test this filament anyway)

Print settings: see above