Stokke Steps - Footrest repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple printable part for repairing/remaking a footrest for the "Stokke Steps" chair
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 696
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The small peg/stub holding the footrest to the chair's leg broke on my Stokke Steps chair.
I designed this piece to replace it.
Print the two parts, and use a wooden tablet to replace the plastic footrest
Use short wood screws to fix the printed parts to the wooden tablet.
The wooden piece can been rounded over using a jigsaw or router, and can be sanded/polished to whistand child abuse ;)
I used a piece of oak for mine, but you can use whatever essence you find/like…
The original thumb screw can be reused.
The printed parts have an extra rib to enhance the toughness and compensate the lower resistance of printed parts.
Print with 4-5 perimeters and 50% infill for extra resistance