Stokke Steps - Footrest repair
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple printable part for repairing/remaking a footrest for the "Stokke Steps" chair
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 64
- Makes
- 0
- Views
- 697
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The small peg/stub holding the footrest to the chair's leg broke on my Stokke Steps chair.
I designed this piece to replace it.
Print the two parts, and use a wooden tablet to replace the plastic footrest
Use short wood screws to fix the printed parts to the wooden tablet.
The wooden piece can been rounded over using a jigsaw or router, and can be sanded/polished to whistand child abuse ;)
I used a piece of oak for mine, but you can use whatever essence you find/like…
The original thumb screw can be reused.
The printed parts have an extra rib to enhance the toughness and compensate the lower resistance of printed parts.
Print with 4-5 perimeters and 50% infill for extra resistance