Counting matching models…
https://www.buymeacoffee.com/maxt ---------------------- UPDATE 22nd Mar 2023 : The model has been updated to v4. A complete rework based on Tripp Trapp Trofast Clip (metal basket) . That model gave me the idea, that it's much better to…
The original adapter by @MaxT has a very tight fit on my two Tripp Trapp Stokke chairs from 2020 and 2015 with IKEA Trofast plastic storage boxes from 2024. This remix adds a total of 3mm of extra width (1.5mm on each side) compared to…
I used PETG but you may be able to get away with PLA
Couldn't get the orginal (https://www.thingiverse.com/thing:3336214) to fit on any available feet. Remixed it to fit these feet (https://www.prusaprinters.org/prints/120019-tripp-trappr-stokke-back-feet)
Adapter to attach baby set to old Tripp Trapps with 75mm bracket
V2 is 0,3 mm wider than the orgin version, that equals about 2%
A 3D-printable storage box, compatible with the Tripp Trapp® chair and Tripp Trapp® Baby Set. Designed as a single piece for easy printing on your Prusa Mini+, this box offers a convenient solution to keep your child's essentials neatly…
My wife wanted a toy hanger for the Newborn seat. I made a model in SolidWorks based on pictures from the original one. Because it is too large to fit on the printbed I bend the model untill it fit the build volume. Afterwards I heated it…
I remixed Ampallang's design to fit my old design Stokke Tripp Trapp chair. Use at own risk. It might be necessary to rework the countersink in order to not scratch your floor with the screw head.
My son fell several times from the chair. I, therefore, designed these armrests. In addition to functioning as armrests, they work great as handles when the child is climbing on the seat. Also, when you move the seat close to the table,…
I remixed this model ( https://www.printables.com/model/85552-stokke-tripp-trapp-back-hook ) to create a slightly thinner hook. And I also added a version with a slightly different hook shape. I used PETG but you may be able to print it…
These backfeet are suitable with my uploaded extended slider. You will need this with the Tripp Trapp newborn set.
Used solder to mold the contours of the tray and chair sides, took a picture on graph paper and set as canvas in Fusion 360. Sketched over it and extruded a solid to make the part. Its a simple quick print, printed on my SV06 with…
I designed a front foot for my used '12 Stokke Tripp Trapp chair. The front edge was a little bit worn, so I wanted to cover and protect it. It fits snug without a screw or adhesive. Maybe you need to cut a little off the front cylinder…
Remix for the back foot. Fits both sides. It has the indent so the extension can snap in and hold it in place Category: Household
These Extensions replace the factory feet of the Stokke Tripp Trapp high chair. I have the old version, no idea if they fit the new chairs. The Extensions prevent the chair from tripping over backwards if the kid pushes hard. Having the…
Arch for stokke tripp trapp, print preferably with PETG and glue the two parts together.
Clip for Stokke Flexi Bath - Fold the bathtub and insert it into the clip. - Enjoy your space-saving solution for storing your Stokke Flexi Bath. Print PLA 3 perimeters bit denser infill (I used adaptive cubic 30%)
Mirror version so it fits on the left side.
Halterungen um den 5-Punkt-Sicherheitsgurt von Stokke am Tripp Trapp befestigen zu können. Montage erfolgt wie beim Original. Wurde 3D-Druck-freundlich konstruiert: Möglichst wenig Überhänge und integrierte Supports. Gedruckt mit vier Top…
This is an adapter to fit extended gliders on the back feet of a Stokke Tripp Trapp chair. The locking mechanism was inspired from the great design by JonsBronnu ( https://www.thingiverse.com/thing:1429208 ). The main difference is that…
Print it 100% infill, lowest layerheight possible. Screw nut into hole to create threads or use tapping tool and 5mm tapp.
Hi 3D printing friends! This design is a replacement bracket cover for the Stokke Sleepi Crib/Bed. The small plastic covers go over the bracket and protect the wood of the crib/bed. I printed these in PETG for a bit of flex once the…
Das ist ein Ersatz für die Faltsicherung für das Stokke® Flexi Bath®. Der Haken kann einfach an beiden Seiten eingehängt werden. This is a replacemnt for a Stokke® Flexi Bath® folding lock. The hook can hooked on both sides.…
TrappCaddy is a full-width snap-in storage bin designed to mount behind the backrest of the Stokke Tripp Trapp chair . After seeing other printable versions that didn’t fully convince me, I designed TrappCaddy to use the entire width of…
Tired of not knowing where to put your Stokke Tripp Trapp tray when it’s not in use? Meet the TrayDock for Tripp Trapp — a pair of smart, spring-loaded clips that let you neatly store the tray behind the chair’s backrest, always within…
EDIT 23/05/2022 Verison 2 Can be printed on its side, making it stronger. Also uses less support. 20/05/2022 A simple but effective adapter for the Stokke chair. This way you can lower the seat a level and still use the tabletop. Now…
This adapter turns your IKEA Trofast mesh basket into a drawer for your Strokke Tripp Trapp high chair. The adapter clips to the inside of the high chair leg and provides a slot for the rails of the basket to slide in. This model was made…
This model allows the use of Bugaboo accesories on Babyzen YoYo stroller. Print a second mirrored version, many accesories need 2 places to be held. The .3mf already has the mirrored version. Need supports, I recommend tree ones. For…
Foot extender for older model Stokke Tripp Trapp high chairs. Helps to prevent tipping the chair over. Use at your own risk! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2mm Infill: 50%…
Printed using generic PETG with 0.4 nozzle, 0.2 layer height, 15% infill, 3 perimeters. Snaps-on for a very snug and secure fit. Requires considerable force to snap off. Used for stokke harness project with tri-glides, 18 mm webbing and 5…
We lost the harness adjustment piece when we washed our harness, so I decided to design and print a new one!
slides onto plastic foot. Print instructions printed in PLA, 0.2mm layer thickness. fits in our case and does its job.
The small peg/stub holding the footrest to the chair's leg broke on my Stokke Steps chair. I designed this piece to replace it. Print the two parts, and use a wooden tablet to replace the plastic footrest Use short wood screws to fix the…
A replacement brace for the Stokke Tripp Trapp Need to be glued together, due to small printbeds. A better version is currently being designed.
The hook attaching the adjustable rod to the upper part of the bouncer broke on my Stokke "Steps Bouncer" This is a replacement for this part Had to cut the rivet and replace it with an M3 screw and bolt EDIT: Uploaded a beefier version,…
A cover for the hole left in the old version of the Stokke Tripp Trapp highchair when the safety bar is not in use
Cap for the safety bar hole of the old version of a Stokke Tripp Trapp chair. You may need to wind some tape around it for a tight fit. The holes have quite some tolerance. Printing: Layer height: 0.15mm Infill: 20% Orientation: same as STL
My settings were: 0.6 Nozzle 3 wall loops 13% infill Gyroid infill Supports: Build plate only (Normal grid) No brim Normal supports for the inner parts where the trofast box slides in. Not needed for the bumps i added, atleast on my A1…
Tolerances are tight by design to ensure a snug, wobble-free fit. You will need to apply a firm push to put it into place. ### Recommended Print Settings * Material: PETG recommended (provides the required flexibility and impact…
Replacement feet for Stokke Tripp Trapp Attach a self-adhesive felt glider (3mm plus thickness) cut to fit the cutout in the printed part to prevent scratching the floor Autodesk Fusion file included.
It is a small hook, which is clipping at the back of the char. No support needed.
I printed with 0.6 nozzle, it's strong, but 0.4 might be more precise…
Bushing for Stokke Gravity headrest. This is meant as a replacement for the bushing behind the thumb screw on the back of the chair, which has a tendency to break. The factory does not make this part anymore, but I know that some of the…
This is a small hanger/hook for the bathtub to be hung on its stand
Remix of Stokke Tripp Trapp Front Foot by @koy00_249879 . I removed the pins as they did not fit my chair (it was close though). Attached with hot glue
This is a replacement cover for the center hole of the Mutable kids’ table, designed after we lost ours (thanks to our kids, of course). The design includes two variations: With hole: Maintains the original functionality for easy access…
This is a redesign of @matzpe tripptrapp adapter. I liked the stronger version of @3D_Druck_Felix but the STL did not fit my old tripptrapp because it did not have the 75mm space clip, but only 68mm. My remix has the dimensions of @matzpe…
Sind für einen Stokker Tripp Trapp Hochstuhl geeignet sind gleich wie das Original
Turn your little one’s Tripp Trapp into the Iron Throne in between Mealtime The TrayThrone for Tripp Trapp is a decorative add-on designed to fit the back side of the Stokke tray , perfectly visible when stored in your TrayDock . Because…
This part prevents the removal of the Playtray by the child. It is best to print two copies and fasten the parts with the original screws on each side.
This pen holder is designed as a practical accessory for the Stokke MuTable V2 kids table. It helps keep pencils, markers and small toys organized and within easy reach during creative play. The model is easy to print and works well with…
The strap adjuster that came with our Stokke High Chair was always coming off the straps because the opening you feed the straps through was too wide. This version is nearly identical but closes up the gap. Functions well as a replacement…
Don't print in PA / Nylon. This has tendance to leave sandy white marks on the floor. Use ASA instead. It's a very tight fit.
Stokke Sleepi Crib/Bed Bracket Cover with hole for longer screws
If you lose on of your screws/bolts for the tripp trapp chair, this will turn a standard bolt into the rectangular bolt you need for the chair. m5 35 screw needed.
Hook attaching the adjustable rod to the upper part of Stokke "Steps Bouncer". Remixed with threaded insert. BOM: 1x M3 threaded insert 1x M3x27,5 (Minimum lenght) Before first use, thread the screw in from the insert side to form threads…
This is without the satetylatch. one 3d printable model and also a lookalike model
### Required Hardware & Tools * 3× M3 heat-set threaded inserts * 3× M3 × 10 mm screws * Utility knife / craft knife (e.g. Stanley knife) ### Preparation & Installation 1. Trim the broken latch: Cut off the remnants of the original broken…
The Stokke Tripp Trapp high chair is extremely adjustable, but due to a structural bar there's a point at which moving the foot plate takes a huge jump. This print is designed to help make that jump less huge. Designed in Fusion3D and…
Calle de remplacement pour fixer les différents pièces. Replacement part fort the spacer to join different piece. Curved or not
Halterungen um den 5-Punkt-Sicherheitsgurt von Stokke am Tripp Trapp befestigen zu können. Montage erfolgt wie beim Original. Wurde 3D-Druck-freundlich konstruiert: Möglichst wenig Überhänge und integrierte Supports. Gedruckt mit vier Top…
Tired of not knowing where to put your Stokke Tripp Trapp tray when it’s not in use? Meet the TrayDock for Tripp Trapp — a pair of smart, spring-loaded clips that let you neatly store the tray behind the chair’s backrest, always within…
The strap adjuster that came with our Stokke High Chair was always coming off the straps because the opening you feed the straps through was too wide. This version is nearly identical but closes up the gap. Functions well as a replacement…
Sind für einen Stokker Tripp Trapp Hochstuhl geeignet sind gleich wie das Original
This is without the satetylatch. one 3d printable model and also a lookalike model
V2 is 0,3 mm wider than the orgin version, that equals about 2%
A replacement brace for the Stokke Tripp Trapp Need to be glued together, due to small printbeds. A better version is currently being designed.
This simple adapter can be mounted to older Stokkes Tripp Trapp baby chairs fabricated until 2013. This allows to mount the extended gliders, which are needed to increase safety. The factory gliders for the older chairs are currently out…
An early model of mine for attaching a hanging toy to a Stokke Tripp Trapp chair with the newborn attachment. It mounts to the wooden backrest of the chair. Designed with .2mm tolerance for friction fit parts (printble on 235*235 bed…
Hook for the accessory bracket in the Stoke Xplory strollers. Useful to hang bags, handbags, etc.
Reupload from Thingiverse. Hello you, I have made this cupholder to mount on the Stokke Xplory stroller. I have done this design from https://www.thingiverse.com/thing:1031800 , thanks to him. I did some resizing job to fit the stroller.…
Two replacements for the Campooz lazy jack (and other). Replacement of the heavy extension of the middle pole. Also used as extension for the side poles. Using 4cm PVC pipe. Replacement of the heavy black side awning poles, using 28mm…
Lost one of my extended gliders that came with Stokke newborn seat for my tripp trapp chair. This is a quick and dirty model which does the same as the original one.
Halterung für das Babyset, wenn man die Sitzfläche eine Aussparung tiefer anbringt.
Introduction: The original part on my Stokke Xplory was missing because it broke, so I had to create a spare/repair part in order to lock down the seat. I've altered the model compared to the original and made it slightly thicker in hope…
After decades in use, the plastic pegs inserted into the spring feet of the chair are starting to fail. I printed this part in tough PLA to replace the broken ones.
If you broke hook of stokke stroller bag same as me, check this design and solve problem instead of buying new one.
