1 / 5
Stokke Sleepi Crib/Bed Bracket Cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement bracket cover for Stokke Sleepi Crib/Bed
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 124
- Makes
- 1
- Views
- 943
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi 3D printing friends! This design is a replacement bracket cover for the Stokke Sleepi Crib/Bed. The small plastic covers go over the bracket and protect the wood of the crib/bed.
I printed these in PETG for a bit of flex once the brackets were tightened down. These should be printed with the angled surface touching the bed for improved strength (layer direction) and resolution.
Recommended Settings:
- 0.4 mm nozzle
- 0.2 layer height
- 30% infill (gyroid)
- No supports
- Used a Brim for Adhesion