Stokke Tripp Trapp Toy hanger
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.88 – €1.08 net (excluding VAT)
For file: tripp-trapp-side-clip-base_02mm_pet_mk3s_1h5m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.98 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 1.08 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
My wife wanted a toy hanger for the Newborn seat. I made a model in SolidWorks based on pictures from the original one.
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 369
- Makes
- 2
- Views
- 2,624
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
My wife wanted a toy hanger for the Newborn seat. I made a model in SolidWorks based on pictures from the original one. Because it is too large to fit on the printbed I bend the model untill it fit the build volume. Afterwards I heated it in the oven to deploy it.
NOTE: It only fits the older version of the newborn seat of Tripp Trapp, so check the photos if your seat looks similar.
It is one single part but I added the base clip also as a separate model so you can combine it with a hook or whatever you want.
Don't use it to sell it since the original isn't even expensive. Its just a nice thing to show what a printer can do ;)
Print instructions
For slicing in PrusaSlicer you need to scale it to 99.99% otherwise it will not slice.
Print with PETG since PLA will break and leave sharp objects.
Print with many perimeters.
Print solid (100% infill)
Heat in the oven at 110 deg C untill its is bendable. (10 mins for me)
Bend in the wished shape.
Be carefull to not deform the clip on the bottom.
Printed on a Mk3s.