1 / 3
Stokke Xplory Seat Lock (spare/repair) — image 1
1 / 3

Stokke Xplory Seat Lock (spare/repair)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This part is used to repair the Stokke Xplory seat fastener.

Rating
0 / 5
Likes
5
Downloads
52
Makes
1
Views
558
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Introduction:

The original part on my Stokke Xplory was missing because it broke, so I had to create a spare/repair part in order to lock down the seat. 
I've altered the model compared to the original and made it slightly thicker in hope that it wouldn't break so easily.

Recommendations:  

  • I recommend printing this with a lot of infill to make the part even stronger
  • Preferably in PETG (PLA should be fine, but is untested)
  • Consider orientating the model so that the print lines don't receive too much force/pressure (I've oriented the model the same way I printed it)

Print notes:

Only a small area of supports is needed when printing in a 45° degree angle. Other angles will work as well but might need more cleanup after printing.

I created a .3mf example where a support blocker is added to minimize the use of support. 

Happy Printing!

Tags