Creality Ender 3 S1 circular Fan Duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my version of better cooling circular fan duct for Ender 3 S1 (Plus/Pro) printer.
- Ocena
- 3 / 5
- Polubienia
- 75
- Pobrania
- 710
- Wydruki
- 5
- Wyświetlenia
- 2855
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This Fanduct must fit as is, replacing default fanduct on Ender 3 S1 (also Plus/Pro versions). I've printed with PETG(240° nozzle/75° bed)
UPD: some users told that PLA MAKE COULD BE MELTED during usage, let me know in a comments if you had such behavior.
The airflow become much effective, especially on the back side of model.
Strong recommendation for print settings!!!
Tree supports, touching bed only, do not use supports inside the model, it will block the airflow!
LAYER HEIGHT - 0.1mm, NOZZLE ≤ 0.4mm
because walls are very thin - only 0.4mm.
Model is very light, only ~ 4g.
All comments and requests for improvement are welcome!
Cheers!