Seat back power strip holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to fit the standard ford headrest supports, this handy gadget provides easier access to your inverter.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 482
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Adding an inverter to a work truck is a modern necessity. Getting access to it afterward is a modern hardship!
This bracket and cage setup will hold the attached 6 outlet power strip against the back of the passenger seat. It slips around the vertical supports for the headrest and keeps your power cords and adapters off the floor and out of harms way.
Print with as much infill as you dare, mine is 60% on the frame and brackets, 90% on the bolts. Supports needed for the frame, but not for anything else.
Designed for this power strip, but will likely work with others:
https://www.amazon.ca/gp/product/B097JGGJTW/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Share and enjoy!