Zoids Replacement Part - Gusak - A4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This piece serves as a simple replacement part for a 'Takara Tomy - Gusak' for the part 'A4'.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 1
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As I was repairing and refurbish a used “Gusak” Takara Tomy Mechanical Model, I noticed that the part 'A-4' was missing from it.
So, I went on to Fusion 360, and using reference imagery, I quickly whipped up a replica for it and printed it! It was a success!
I would advise to do some initial filing/sanding in the fitting groove on the underside as the tolerances are quite tight, but it is meant to be glued in place inevitably.
Of course you'll get a higher definition of it through Resin Printing, but I succeeded in printing it in FDM just fine as well!
I hope this is of help to many fellow Zoids fans!