Zoids Replacement Part - Gusak - A4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This piece serves as a simple replacement part for a 'Takara Tomy - Gusak' for the part 'A4'.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 1
- Views
- 202
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
As I was repairing and refurbish a used “Gusak” Takara Tomy Mechanical Model, I noticed that the part 'A-4' was missing from it.
So, I went on to Fusion 360, and using reference imagery, I quickly whipped up a replica for it and printed it! It was a success!
I would advise to do some initial filing/sanding in the fitting groove on the underside as the tolerances are quite tight, but it is meant to be glued in place inevitably.
Of course you'll get a higher definition of it through Resin Printing, but I succeeded in printing it in FDM just fine as well!
I hope this is of help to many fellow Zoids fans!