1 / 3
Twist Lock Antique Piggy Bank Cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement cap for an antique piggy bank.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 421
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Summary
This is the twist lock plug for an antique plastic piggy bank from the late 1950s.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:
Doesn't Matter
- Supports:
Yes
- Resolution:
Maximum 0.12
- Infill:
100%
- Filament brand:
Any
- Filament color:
Any
- Filament material:
PLA or other
- Notes:
I used support for the lip.
PRINTER: Ender 3 Pro with MicroSwiss direct drive
Retract:6.5
Nozzle: 0.40
The wall of the bank was 2mm (gap between the lip and ears).
Hole Diameter: 33.32mm. Ears were 2.4mm
POST PROCESSING: Carefully remove support from lip.