Parametric Gunpla Paint Stick/Clip Holder - Gridfinity Refined
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gunpla Paint Stick/Clip Holder on a Gridfinity Refined Base, Parametric
- Ocena
- 4 / 5
- Polubienia
- 63
- Pobrania
- 418
- Wydruki
- 1
- Wyświetlenia
- 2170
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Paint Clip/Stick holder for Gunpla building.
It's built on a Gridfinity Refined base, which is based on Gridfinity by Zack Freedman.
Fully parametric, so it can be modified for how large you need it to be and the size of your clips. The uploaded models are using 3mm holes for my 2.5mm sticks, with a 6x5 size (approximately 252mm x 210mm). This took 40h on my x1c and 910g of plastic, with 12% infill. I recommend a height of at least 7 layers (49mm), since this gives enough grab onto the clips that they won't fall apart. The top of the entry holes are all fileted enough that they don't overrun into one another, but makes it easier to put the sticks in without precisely aligning them.
Most things should be auto calced using just the user-defined presets, including density, filet size, etc - however, for the Gunpla Painter logo on the front, you might have to modify that manually, as I couldn't get it fully parametric (willing to take feedback). The text is done using the SEELE TWO font, which is the official font used in many anime, including The Witch from Mercury.