(360) Camera anti vibration adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makeshift anti vibration solution for a small 360 camera, turned out to work quite well.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Made for small 360 cameras up to approx. ½ kg. Designed to filter out vibrations, e.g. induced by subwoofers. It was a makeshift solution born out of necessity within a short timeframe but turned out to work quite well.
Please note that you need a flexible filament to print the “rubber rings”. TPU hardness may need adaption to you specific needs. Alternatively you can print the rings with a lower thickness if you find them too hard.
I have used extrudr® TPU Flex medium for a setup with a weight of ~360 grams.
Additional parts needed:
- screw M3x10 - 8 pcs.
- nut M3 - 8 pcs.
The standoffs in the photo are from an adapter set similar to this one: https://www.amazon.com/dp/B08L4JP5L8/ref=sspa_dk_detail_4
(they exist in variants all over the internet)