(360) Camera anti vibration adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Makeshift anti vibration solution for a small 360 camera, turned out to work quite well.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 38
- Makes
- 0
- Views
- 267
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
Made for small 360 cameras up to approx. ½ kg. Designed to filter out vibrations, e.g. induced by subwoofers. It was a makeshift solution born out of necessity within a short timeframe but turned out to work quite well.
Please note that you need a flexible filament to print the “rubber rings”. TPU hardness may need adaption to you specific needs. Alternatively you can print the rings with a lower thickness if you find them too hard.
I have used extrudr® TPU Flex medium for a setup with a weight of ~360 grams.
Additional parts needed:
- screw M3x10 - 8 pcs.
- nut M3 - 8 pcs.
The standoffs in the photo are from an adapter set similar to this one: https://www.amazon.com/dp/B08L4JP5L8/ref=sspa_dk_detail_4
(they exist in variants all over the internet)