#0106 Hinged Box for the Moyu Magnetic Rubik's Cube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rugged hinged box to protect the Moyu Magnetic Rubik's Cube
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 108
- Wydruki
- 3
- Wyświetlenia
- 691
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
*** Thanks for checking out this model! ***
If you appreciate what I'm doing, consider buying me a coffee, and check out my other models for something else you might like!

**********
[CORRECTION: Mar 17, 2024]
The wrong model was originally uploaded (without hinges). The corrected hinged ones have now replaced them.
***********
My son takes pride in being a cuber. Practices it regularly and likes to protect it - so naturally he asked me to make him one after his protective box broke.
Simple proven design. Fits a 56mm cube. Printed in 2 parts and uses a piece of 1.75mm filament to thread inside the knuckles.
Recommendation:
- Use any filament you'd like.
- 0.2mm layer, 0.4mm nozzle.
- Use 3mm brim to keep the corners stuck down.
Instructions:
- Chase the hinge hole with a 2mm drill bit mounted to a power drill.

- Heat up one end of the filament with a mini torch then smash the filament down vertically against a flat surface to flair out like a “rivet head”.
- Cut the other end of the filament to form a tip to help you thread it through the hinge hole.

- After threading, cut that end down so that it only sticks out about 1mm from the hinge knuckle.
- Use a mini torch to carefully heat up this end as well (without melting the knuckle close by) and smash it down to form another "rivet head". Now both ends of the filament capture the hinge knuckles and locked in place.

That's it! Now you can drop in your cube and enjoy the protection it provides!
If you add this to your collection and/or download the model, please click the LIKE button and give it some STARS!
Remember, you can earn some Prusameters if you post a pic of your make! Plus, it would make my day to see it. ;-D
Happy Printing!