1 / 8
CR-5 Pro H Heat sink fan duct
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ask to improve the cooling of the cr-5 pro h heat sink. Print on PET-G/ABS, ASA, PP, NYLON.... No supports needed.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 547
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
The model replaces the original version which causes a lot of cloging due to not cooling sufficiently. Unique ventilation increases the printer's filament volumetric capacity by up to 25%.
Can be printed on PET-G, ABS or superior materials, PLA is not recommended.
The design was designed to not use screws or permanent fixing.
It is necessary to remove the original metal protection to use the modification.