Ryobi BT3000 table saw adjustment wheel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Main adjustment wheel for blade raise/lower mechanism (the only non-metal part, so it's prone to stripping).
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 397
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
This wheel can get its center slot-hole stripped if you try to turn it too hard as it is the only non-metal piece involved in the blade raise/lower mechanism. Lubricate your bevel gears!
It's a tight fit and I had to file both the crank handle pin hole and the center slot a tiny bit. Use a pair of snap ring pliers (generally an automotive tool; you might be able to borrow from your local auto parts store) to transfer the handle. Use a mallet and a block of wood to lightly tap the wheel onto the center axle before replacing the center hex screw.
Print Settings
Printer Brand:
LulzBot
Printer:
Mini 2
Rafts:
No
Supports:
Yes
Resolution:
0.38
Infill:
20%
Filament:
Proto-pasta PLA Black
Notes:
Increase wall thickness to 2mm.