Ryobi BT3000 table saw adjustment wheel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Main adjustment wheel for blade raise/lower mechanism (the only non-metal part, so it's prone to stripping).
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 38
- Makes
- 0
- Views
- 397
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
This wheel can get its center slot-hole stripped if you try to turn it too hard as it is the only non-metal piece involved in the blade raise/lower mechanism. Lubricate your bevel gears!
It's a tight fit and I had to file both the crank handle pin hole and the center slot a tiny bit. Use a pair of snap ring pliers (generally an automotive tool; you might be able to borrow from your local auto parts store) to transfer the handle. Use a mallet and a block of wood to lightly tap the wheel onto the center axle before replacing the center hex screw.
Print Settings
Printer Brand:
LulzBot
Printer:
Mini 2
Rafts:
No
Supports:
Yes
Resolution:
0.38
Infill:
20%
Filament:
Proto-pasta PLA Black
Notes:
Increase wall thickness to 2mm.