1 / 2
5/16-inch (8mm) Barbed to Male Garden Hose Fitting — zdjęcie 1
1 / 2

5/16-inch (8mm) Barbed to Male Garden Hose Fitting

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

5/16-inch (8mm) Barbed to Male Garden Hose Fitting

Ocena
5 / 5
Polubienia
23
Pobrania
328
Wydruki
1
Wyświetlenia
895
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Two versions, one barbed, one stubby beaded. 

I highly recommend you print this model with the barb pointed down. This accomplishes three things:

  1. You'll need supports regardless. They might as well be easy to remove. 
  2. This orientation preserves the inside flat face so that the gasket can make a seal (instead of it getting all mucked up by support leftovers).
  3. The threads will be as good as they get (as opposed to printing the object on its side).

Tagi