5015 Cooling fan adapter for Snapmaker 2.0 AT/F 3D printing module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
5015-type cooling fan adapter for snapmaker 2.0 AT/F inspired by https://www.thingiverse.com/thing:4769737
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 416
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an original design, but inspired by https://www.thingiverse.com/thing:4769737
5015-type cooling fan adapter for Snapmaker 2.0 AT/F series.
It was created to enhance cooling of 3D printed modules.
The adapter is designed so that it does not block the air inlet/outlet and does not block the filament or nozzle replacements.
The first file is a single duct with forward vent only, and the second file is a double duct with front and rear vents.
Do not use PLA to prevent deformation or damage due to heat. I used nylon filament.
You can see more detail on https://monohoshi.blog/3dprinter-cooling/
- I am not responsible for any malfunctions caused by the use of this component.
BOMs
M2x10mm screw x4 for fix to print module
M3 insert nut and M3x20mm screw x2 for fix 5015 fan
Print Settings
Printer:
Snapmaker 2.0
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament:
Polymaker Polymide CoPA (NYLON)
Black
Notes:
＊Important Notice.
This model requires supports at printing, but the supports must be set to "support on build plate only" to prevent supports from occurring in the duct. In addition, some supports must be added manually.