1 / 5
5015 Cooling fan adapter for Snapmaker 2.0 AT/F 3D printing module — image 1
1 / 5

5015 Cooling fan adapter for Snapmaker 2.0 AT/F 3D printing module

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

5015-type cooling fan adapter for snapmaker 2.0 AT/F inspired by https://www.thingiverse.com/thing:4769737

Rating
0 / 5
Likes
2
Downloads
41
Makes
0
Views
417
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is an original design, but inspired by https://www.thingiverse.com/thing:4769737

5015-type cooling fan adapter for Snapmaker 2.0 AT/F series.

It was created to enhance cooling of 3D printed modules.

The adapter is designed so that it does not block the air inlet/outlet and does not block the filament or nozzle replacements.

The first file is a single duct with forward vent only, and the second file is a double duct with front and rear vents.

Do not use PLA to prevent deformation or damage due to heat. I used nylon filament.

You can see more detail on https://monohoshi.blog/3dprinter-cooling/

  • I am not responsible for any malfunctions caused by the use of this component.

BOMs

M2x10mm screw x4 for fix to print module

M3 insert nut and M3x20mm screw x2 for fix 5015 fan

Print Settings

Printer:

Snapmaker 2.0

Rafts: 

No

Supports:

Yes

Resolution: 

0.2

Infill:

20%

Filament:

Polymaker Polymide CoPA (NYLON) 

Black


 

Notes:

 

*Important Notice.
This model requires supports at printing, but the supports must be set to "support on build plate only" to prevent supports from occurring in the duct. In addition, some supports must be added manually.

Tags