Flagpole Cap w/ Loop for Carabiner (STEP file available)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The cap for my flagpole mysteriously disappeared. I designed this replacement. FAST print, spool-finisher. Only 3.7g.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
WHAT IS IT?
This is a cap for the end of your flagpole.
I went to check my flagpole in the spring and discovered that the end cap was gone, and thus, I couldn't attach my flag because the end cap had the hoop to clip The Flag onto! I measured the pole and designed this as a replacement so that I could still fly The Flag.
NO ADDITIONAL HARDWARE NEEDED
MY PRINT SETTINGS
I recommend you print this as strong as you can to make sure it can hold the flag through the elements. I also recommend you print this in white, since any other color will fade in the sun.
My included files are for my Ender 3 v2 Neo, which isn't a very fast printer. If you're lucky enough to have a Prusa or a BambuLab printer, your print time will probably be much, much faster.