1 / 12
VoCore 4.3" Dash - 18 Leds - Arduino/Simhub — zdjęcie 1
1 / 12

VoCore 4.3" Dash - 18 Leds - Arduino/Simhub

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dash compatta per Simracing con display VoCore 4.3" e led a bulbo comandati da Arduino

Ocena
0 / 5
Polubienia
25
Pobrania
169
Wydruki
0
Wyświetlenia
1605
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial

Dash 2.0 riprogettata per VoCore 4.3" (Micro USB)

Diviso in 3 sezioni:

Fronte Led PCB:
chiusura e posizionamento display e dei Led piatti su PCB (Chip led WS2812E)

Fronte Led a bulbo:
chiusura e posizionamento display e dei Led a bulbo (LEDNexus PL9823-F5 WS2812)

Anello chiusura :
distanzia il display e lascia spazio ai collegamenti e ad eventuale inserimento scheda Arduino

Retro  :
ospita il collegamento Usb e viti di chiusura (M3x16).

4 versioni:

  •  con/senza foro per usb 
  •  con/senza staffe a 4 altezze per Fanatec DD1/DD2

Upgrade: migliorati i supporti dello schermo

Led cover : 

stampare in PETG trasparente per simulare la luce dei led a bolla e applicare internamente al fronte prima di montare i Led

Il sistema è gestibile tramite Simhub che permette di personalizzare l'uso dei Led tramite Arduino

ATTENZIONE:
utilizzando i Chip led WS2812E prestare attenzione al flusso dei dati,
Din (ingresso)
Dout (uscita)

-------------------------------------

Dash 2.0 redesigned for VoCore 4.3" (Micro USB)

Divided into 3 sections:

Front Led PCB:
closing and positioning of display and flat LEDs on PCB (WS2812E LED chip)

Front LED bulb:
closing and positioning of the display and bulb LEDs (LEDNexus PL9823-F5 WS2812)

Closing ring:
spaces the display and leaves room for connections and possible insertion of the Arduino board

Back:
houses the USB connection and locking screws (M3x16).

4 versions: 

  •  with/without USB hole 
  •  with/without brackets at 4 heights for Fanatec DD1/DD2

Upgrade: Improved screen supports

LED covers:

print in transparent PETG to simulate the light of bubble LEDs and apply internally to the front before mounting the LEDs

The system can be managed via Simhub which allows you to customize the use of LEDs via Arduino

ATTENTION:
using the WS2812E LED chips pay attention to the data flow,
Din (input)
Dout (exit)

 

Enjoy it..

Tagi