1 / 11
ArloQ Security Camera Wall Mount — zdjęcie 1
1 / 11

ArloQ Security Camera Wall Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replaces the original wall mounting solution that disintegrated. Mostly 3D printed however some hardware is required.

Ocena
0 / 5
Polubienia
5
Pobrania
10
Wydruki
0
Wyświetlenia
473
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A mostly 3D printed wall mount solution for the ArloQ security camera. I had recently bought some heat set inserts and wanted to try them out, so this wall mount requires some hardware. A step file is included so you can adjust for hex nut size. For reference, the hex nuts I have are 5.4mm across (circumscribed) and 2.3mm deep.

Hardware Required:

  • M3 X 16 BHCS (2)
  • M3 X 20 BHCS (2)
  • M3 X D5 X L4 Heat Set Insert (2)
  • M3 Hex Nuts (2)
  • Command Strips (2 pairs)
  • 80mm of 1.75 filament (2)

 

Recommended Print Parameters:

  • 0.2mm layer height
  • 3 perimeters
  • 20% infill

 

Print Instructions:

  • Clamping Arm (2)
  • Elevation Arm (1)
  • Slider (1)
  • Threaded Cap (1)
  • Wall Mount (1)
  • Rotating Joint (1)

OR

  • Complete Plate (1)

 

*Refer to photographs above for assembly instructions.

 

Designed in Fusion 360, printed on a Creality Ender 3 Neo.

Happy printing and thank you for downloading my model!

Tagi