1 / 11
ArloQ Security Camera Wall Mount — image 1
1 / 11

ArloQ Security Camera Wall Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replaces the original wall mounting solution that disintegrated. Mostly 3D printed however some hardware is required.

Rating
0 / 5
Likes
5
Downloads
10
Makes
0
Views
473
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

A mostly 3D printed wall mount solution for the ArloQ security camera. I had recently bought some heat set inserts and wanted to try them out, so this wall mount requires some hardware. A step file is included so you can adjust for hex nut size. For reference, the hex nuts I have are 5.4mm across (circumscribed) and 2.3mm deep.

Hardware Required:

  • M3 X 16 BHCS (2)
  • M3 X 20 BHCS (2)
  • M3 X D5 X L4 Heat Set Insert (2)
  • M3 Hex Nuts (2)
  • Command Strips (2 pairs)
  • 80mm of 1.75 filament (2)

 

Recommended Print Parameters:

  • 0.2mm layer height
  • 3 perimeters
  • 20% infill

 

Print Instructions:

  • Clamping Arm (2)
  • Elevation Arm (1)
  • Slider (1)
  • Threaded Cap (1)
  • Wall Mount (1)
  • Rotating Joint (1)

OR

  • Complete Plate (1)

 

*Refer to photographs above for assembly instructions.

 

Designed in Fusion 360, printed on a Creality Ender 3 Neo.

Happy printing and thank you for downloading my model!

Tags