1 / 4
Corsair Virtuoso XT Charging Base for Skadis — zdjęcie 1
1 / 4

Corsair Virtuoso XT Charging Base for Skadis

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Corsair Virtuoso XT Charging Base for IKEA Skadis pegboard

Ocena
5 / 5
Polubienia
16
Pobrania
77
Wydruki
1
Wyświetlenia
613
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

The only thing I dislike about wireless headphones is there rarely seems to be a nice solution provided to have them charged up all the time.

This is my solution to the problem: a charging base designed around a Volta Spark magnetic charging cable for the Ikea Skadis pegboard.

The cable sticks out a bit at the bottom, but I didn't want to make the base thicker than this. It's not visible from most view angles either way.

Printed in PolyTerra Cotton White @0.16mm layer height. Supports shouldn't be needed if there's good bed adhesion, otherwise some brim around the pegs may be enough. I suggest also adding a modifier to have the pegs print with 100% infill or they might get sliced hollow.

Tagi