1 / 2
Oneway Stronghold Chuck #4 Jaws Tenon Caliper — zdjęcie 1
1 / 2

Oneway Stronghold Chuck #4 Jaws Tenon Caliper

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This caliper helps with sizing a tenon or recess when using a Oneway Stronghold Chuck with #4 profiled jaws.

Ocena
5 / 5
Polubienia
1
Pobrania
44
Wydruki
0
Wyświetlenia
162
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

This caliper helps with sizing a tenon when using a Oneway Stronghold Chuck with #4 profiled jaws. On one side is the minimum diameter of 4 1/4" and the thickness is 3/16" which is the minimum length for a tenon, and on the other side there is the maximum diameter of 5 3/4" and maximum tenon length of 15/32". So as long as your tenon is between both ends in diameter and length it is usable.

I also include a gauge for expansion chucking, it has a minimum diameter of 4 7/8" and a maximum of 6 ½" with a min depth of 1/8" and a max depth of 7/32".

No support needed for either when printed as placed.

Tagi