Oneway Stronghold Chuck #4 Jaws Tenon Caliper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This caliper helps with sizing a tenon or recess when using a Oneway Stronghold Chuck with #4 profiled jaws.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 44
- Makes
- 0
- Views
- 162
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This caliper helps with sizing a tenon when using a Oneway Stronghold Chuck with #4 profiled jaws. On one side is the minimum diameter of 4 1/4" and the thickness is 3/16" which is the minimum length for a tenon, and on the other side there is the maximum diameter of 5 3/4" and maximum tenon length of 15/32". So as long as your tenon is between both ends in diameter and length it is usable.
I also include a gauge for expansion chucking, it has a minimum diameter of 4 7/8" and a maximum of 6 ½" with a min depth of 1/8" and a max depth of 7/32".
No support needed for either when printed as placed.