Portable Monitor Stand Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A riser I designed to go with my portable monitor stand. https://www.printables.com/model/411730-portable-monitor-stand
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 115
- Wydruki
- 1
- Wyświetlenia
- 1484
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
After using my two angle portable monitor stand a few times, I decided to create a companion riser set to go with it. I wanted them to be easy to print, lightweight and stable.
This is my solution. I printed these without supports and at a 0.3mm draft layer height in PLA. When in use I secure the monitor stands to them with a clear small 3M Command Strip placed in the slot on the riser so that they stay firmly in place.
I also added four self adhesive non slip pads in each corner on both to stop them sliding while in use.
The additional height provides a little bit more comfort when used for longer periods.
If you like this model and print one, please post a rating and a picture of your print as I love to see what colors you might choose. Thanks and enjoy the model.