1 / 3
ZeroClick Precut MiniSB R1 cowlings Sherpa Micro Mini — zdjęcie 1
1 / 3

ZeroClick Precut MiniSB R1 cowlings Sherpa Micro Mini

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

No cut cowls for Zeroclick on a V0.2R1

Ocena
5 / 5
Polubienia
14
Pobrania
88
Wydruki
1
Wyświetlenia
927
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

The stock MiniSB cowl for V0.2R1 but for Zeroclick! 

I cut the model so that the Zeroclick probe mount would fit easily. Pilot holes for the self tappers have been made. 

You WILL lose one nozzle sequin slot if you use this cowl. I have Disco on a stick so I don't really need it anymore anyway. 

You'll need 3 voron m3 heat set inserts. Transfer your MiniSB guts over to this cowl and enjoy a sturdy zeroclick mount. 

Print according to the standard voron print settings. 

These are the recommended settings.

  • Layer height: 0.2mm
  • Extrusion width: 0.4mm, forced
  • Infill pecentage: 40%
  • Infill type: grid, gyroid, honeycomb, triangle, or cubic
  • Wall count: 4
  • Solid top/bottom layers: 5
  • Supports: NONE

BONUS: Included a precut version of PVTPrivate's Sherpa Micro R1 Cowling
Another BONUS: Precut version of ^^ Sherpa Mini R1 Cowling. 

Tagi