1 / 3
ZeroClick Precut MiniSB R1 cowlings Sherpa Micro Mini — image 1
1 / 3

ZeroClick Precut MiniSB R1 cowlings Sherpa Micro Mini

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

No cut cowls for Zeroclick on a V0.2R1

Rating
5 / 5
Likes
14
Downloads
88
Makes
1
Views
927
Reviews
1

Updated at source:

Model information

License
GNU General Public License v3.0

The stock MiniSB cowl for V0.2R1 but for Zeroclick! 

I cut the model so that the Zeroclick probe mount would fit easily. Pilot holes for the self tappers have been made. 

You WILL lose one nozzle sequin slot if you use this cowl. I have Disco on a stick so I don't really need it anymore anyway. 

You'll need 3 voron m3 heat set inserts. Transfer your MiniSB guts over to this cowl and enjoy a sturdy zeroclick mount. 

Print according to the standard voron print settings. 

These are the recommended settings.

  • Layer height: 0.2mm
  • Extrusion width: 0.4mm, forced
  • Infill pecentage: 40%
  • Infill type: grid, gyroid, honeycomb, triangle, or cubic
  • Wall count: 4
  • Solid top/bottom layers: 5
  • Supports: NONE

BONUS: Included a precut version of PVTPrivate's Sherpa Micro R1 Cowling
Another BONUS: Precut version of ^^ Sherpa Mini R1 Cowling. 

Tags