25 models
This is a remix of Eondar's Center cam mount ( https://www.printables.com/model/370373 ) I found that it clashed with my ZeroClick mount, so I made a modified their version such that the left side is just a tad shorter.
This dock fits on the Voron 0 z-axis extrusion. Dock is horizontal at 80 degrees. BOM: 1x MG90S micro servo 2x M3x6 BHCS (One must be a steel bolt for magnetic reason) 1x M3x8 BHCS 2x M3 nut 2x M2x10 self-tapping screw
I didn't find an existing way to adapt ZeroClick on my MiniSteahburner so I finally decided to redesign it by my own. I chose to fix it with 2 screws (M2 8mm is fine) and 2 M2 brass inserts (M2 3mm). You have to reprint your toolhead. I…
The stock MiniSB cowl for V0.2R1 but for Zeroclick ! I cut the model so that the Zeroclick probe mount would fit easily. Pilot holes for the self tappers have been made. You WILL lose one nozzle sequin slot if you use this cowl. I have…
The magnets are in slightly different positions in the DB zeroclick cowl compared to the ZeroClick probes magnet position. (This might be because of the ZC probe versions are not followed through on the DB github.) I was afraid it will…
When you use ZeroClick with the Dragon Burner on a Voron 2.4, you can use this probe dock. Rotate 180 degrees along Y before printing. This probe is based on one of the official ZeroClick docks which is licensed by the GPL . CAD source
My v0.1 with a custom toolhead couldn't pick up the zeroclick probe because it didn't have enough Y travel. I needed to move it 2.6mm toward the print bed. This was the result.
Its an edited side dock for a v0 with ZeroClick, Pandora Gantry and Anthead and 12032 Aux-fans. https://github.com/PrintersForAnts/AntHead/tree/main/UserMods/ZeroClick_left_ducting ZeroClick Anthead fan ducts
Uses ZeroClick magnet spacing on Chirpy's alternate voron mount. See their instructions for setup. Using a standard V0 gantry and still want a ZeroClick probe mod? See my other model:
I wanted to be able to use the ZeroClick with my Voron 0.2 but also wanted a filament sensor in the toolhead for eventual integration with a MMU setup like the ERCF. The offset version of the mount is featured in the photos, because I…
For those of us who don't want to buy new fans for a Dragon Burner but still want the convenience of the zeroclick probe and easy extruder changes. Based on tn00364361_495827 s cowling for the orbiter 2, which was inspired by…
This remix is gonna be niche - nothing wrong with the model re:printed 3D made originally, and there are other variants for standard klicky probe. In my case, I have metal v0.1 AB Gantry joints and a sintered v0.1 mgn9c that I wanted to…
The magnets are in slightly different positions in the DB zeroclick cowl compared to the ZeroClick probes magnet position. (This might be because of the ZC probe versions are not followed through on the DB github.) I was afraid it will…
This dock fits on the Voron 0 z-axis extrusion. Dock is horizontal at 80 degrees. BOM: 1x MG90S micro servo 2x M3x6 BHCS (One must be a steel bolt for magnetic reason) 1x M3x8 BHCS 2x M3 nut 2x M2x10 self-tapping screw
Please carefully adjust the height of the mount, test it step by step and make sure it is not crashing the toolhead and nozzle. Credit This model remix different great designs Mechanism from KlickSwipe Mount by mixing…
I got tired from the magnets falling out, gluing them down sucks since the glue can spill out and mess with the conductivity or flatness of the mating surface I got a KlickyPCB kit and with it came these countersunk screw down magnets and…
fixed screw hole length issue, added side to side movement, cut out for linear rail
This uses the M3 screw holes on the rear of the toolhead to mount a ZeroClick probe. For use with Voron V0 style toolheads where these M3 mount points are typically unused. Also substitutes the "Brace_Straight.stl" or "Brace_Loop.stl"…
This is a side-mounted ZeroClick mount for your (SF) AntHead. It isn't a complete ZeroClick system, you'll need the original ZeroClick probe itself and some sort of mount. This assumes you are familiar with ZeroClick, so for anything that…
Original Model is from ZeroClick by zruncho3d My probe did not like to attach or detach, so I hacked this up to fix my specific issues. It may or may not help you, but thanks for looking! Should be Printed using the Voron standards .…
I shortened the Center Dock by 5mm, because my DragonBurner Toolhead with the integrated ZeroClick Mount didn't reach the parked probe fully.
I like the dockable probes for printers but don’t like losing any print space and prefer that when the probe is not in use it is unreachable. I put together a simple servo based dock for the ZeroClick probe as it seemed the smallest and…
I use the awesome ZeroClick with this dock, which is proportional in size to the Voron Micron. For me, the docking takes place in this position: variable_dock_x: 1 variable_dock_y: 189 variable_dock_z: -2 My Klicky macros:…
I needed a rear-mount ZeroClick for my Voron 0.2r1. I couldn't use the centre-mount due to MFNano taking up the space under the rear gantry. However, when I used the stock rear-mount I lost lots of Y-travel. I modified the ZeroClick rear…
