Voron V0.2r1 Mini Stealthburner Orbiter V2.0 Zeroclick Cowling
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A design originally based on the official Voron Bowden Mini Stealthburner cowling.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 267
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
For those of us who don't want to buy new fans for a Dragon Burner but still want the convenience of the zeroclick probe and easy extruder changes.
Based on tn00364361_495827s cowling for the orbiter 2, which was inspired by Oleynick_266380s design of an earlier version. Magnet holder is similar to the one used on the Dragon Burner cowling for microclick.
You will need 3xM3 heat-set inserts (two on the top and one on the back) + 2x(6x3mm) Magnets and wires for contact.
The step file includes 2 bodies and stl gives open geometry warnings since Freecad doesn't seem to like the original step file and says it has an unclosed wire. This does not seem to be tn00364361s fault, since I get the same from from Oleynicks step file.