1 / 7
Cooler Master QUBE 500 Philips Hue Play Mount (No supports) + Bonus — zdjęcie 1
1 / 7

Cooler Master QUBE 500 Philips Hue Play Mount (No supports) + Bonus

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Philips Hue Play mount for your Cooler Master Q500 Case

Ocena
0 / 5
Polubienia
16
Pobrania
21
Wydruki
0
Wyświetlenia
350
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

Philips Hue Play holder for Cooler Master QUBE 500 case with a slide mechanism. No supports are needed.

No need to buy new screws - use the original one from Hue package.

! Can be mounted horizontally or vertically.

 

Print instructions

  • you can print import models separately ("Holder" and “Mount”) or use a model that already has both ("Holder+Mount")
  • No supports are needed (unless you want a top-notch hole quality)
  • You may require a small brim around the holder (taller "Holder" part)
  • 3 perimeters would add some strength
  • 20% infill or higher
  • Printed with 0.15mm layer height, but you may do 0.2mm as well

 

3mf file is included as well. Printed in PLA on Prusa Mini+.

 

Let's win the case for me so I could take photos with this holder mounted on the a case instead of pretending to be a case myself :)

 

Bonus

As a bonus, there is a 6x6 QUBE500 panel replica for you to play around.

 

Hints

Models already have proper orientation set, but there is a hint anyway:

 

This is how a sliced model looks like. Note a brim around Holder.

---

Disclaimer. Since I do not have this case (yet?), I can't guarantee that the device won't fell off the joint. However, during a testing it seemed very rigid.

Tagi