MP07-IONA-US V2 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for the V2 of the MP07-IONA-US PCB. For more info, see my previous case at…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 128
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a case for the V2 of the MP07-IONA-US PCB. For more info, see my previous case at https://www.thingiverse.com/thing:5251839.
I don't personally own the V2 of the PCB, but accurate measurements were provided by the PCB designer in the manual at https://toyoshim.github.io/iona-us/en
Because of this, please consider this case UNTESTED, since I can't verify how well or how poorly the case will fit the PCB. I did do a quick test print to make sure the case snapped together, but that's about it. Please consider this before you decide to print.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
.2
Infill:
20% Grid
Filament: Anything decent PETG Doesn't matter
Notes:
PETG recommended over PLA due to the flex needed for the snap tabs.
Category: Video Games