USB2DB15 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a snap case for the USB2DB15 PCB by Raph_friend.
There are a few other cases out there, including an official one, which you can find on the USB2DB15 forum thread at https://www.arcade-projects.com/threads/open-source-usb2db15-for-supergun-adapter.14205/
For this particular case, I wanted to make sure that the USB port has ample clearance, and I wanted the wall thickness of the PCB case to a very narrow .9mm, which is required to fit 2 of these PCBs onto Frank_fjs' Minigun Supergun.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
20% Grid
Filament: Anything decent PETG or PLA Doesn't matter
Notes:
PETG is recommended over PLA for heat resistance.
Category: Games