Welte-Mignon Piano Music Paper Roll Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement Music Roll holder for the Welte-Mignon Pianos. It holds the paper music roll in the Piano.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 13
- Wydruki
- 1
- Wyświetlenia
- 450
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Background
A friend of mine is the proud owner of a 1918 Welte-Mignon reproducing piano. The Welte-Mignon is the first self-playing piano. However, it is not self-playing in the way you might expect from today's self-driving cars. It is a faithful reproduction of something someone played on a real piano using a roll of paper. It is said to be the first reproducing piano capable of reproducing the original music in terms of tempo, phrasing and pedalling. The recording mechanism is not fully known today, as the only recording machines were destroyed during the war.
You can see and hear it in action here:
Two versions of the Welte Mignon exist in museums and private collections. There are mechanical pianos, which are normally playable and have the additional ability to play piano rolls with the built-in pneumatics, and there are so-called "Vorsetzer" (Put-in-front) with the Welte mechanism, which can push down the normal keys of a normal piano.
It is actually a very fascinating technology from over 100 years ago. You might like to check out the links below.
https://en.wikipedia.org/wiki/Welte-Mignon
Due to its german origin, there is plenty of information in German. A good starting point is the german version of above wikipedia article.
Original Part
The original part is made of wood. For some reason it becomes brittle as can be seen in the pictures. In addition, the woodworm also comes over and likes to have a piece.
I tried to model the original parts as closely as possible. It is a fairly simple geometry, but there are several "versions" of the original parts out there, so it is difficult to tell which is the correct shape. They all look about the same, but vary within 0.5mm. The side plates intentionally come in two different diameters: 58 and 78 mm. The geometries provided here have been tested in the original piano and work fine.
The part is segmented into two parts for better printability. During playback, the paper is simply pulled from the roll. During fast reversing, the right side is driven by the piano via a drive pin. The thread between the parts is therefore left-handed, so that it does not come undone when reversing.
This was my first modeling of a 3D-Printed thread. There was a little trial and error involved. The clearance now works fine but I'd love to get feedback, if you encounter problems.
More on the original part can be found here: https://digital.deutsches-museum.de/projekte/notenrollen/rollentypen/welte_rot_t100/
Modification
Since the paper cores of the rolls have different internal diameters, the idea was to make something adaptable and more universal. The axle is therefore modified to have 'barbs' that give torque transmission a preferred direction. Ideally, this should ensure or increase torque transmission during rewinding. It also makes it easier to insert the axles into the paper rolls when the axle is turned in the opposite direction.
You can find my Models in Onshape and copy and refine them there or export them in a format that you like (like STEP).
Printing
The files described above are in STL format. Please choose whether you prefer the old ("original") or new look for the axle. I recommend printing the parts with the barbed paper roll axles as these are optimised for some variability in the inner diameter of the paper roll and the barbed parts are not visible anyway.
The left-handed thread between the axle and the side plate is used in both the right and left side assemblies for easier part count and identical assembly. If you wish to have a right-handed thread on the left side assembly, please mirror the left side parts in your slicer.
Please print all parts with the threaded end facing the built plate. There should be no need for supports. If the axle comes off the print, you can try a brim. So far, 20% infill has proved sufficient.
Please Select “V2” versions where available.
Assembly
Screw the axle into the side plate. Please note that the thread is left-handed for the reasons given above. If you have used a brim for better bed-adhesion, you will need to remove it before assembly.
Insert the axle into the paper roll by turning it against the "rewind-direction", i.e. clockwise.
Compatibility
So far these are compatible with the Welte-Mignon T100 ("Red") rolls and pianos which date back to a production time somewhere between 1904 and 1932.
Upon request/available time I might add support for the Welte-Mignon T98 ("Green") rolls.
Edit 17. November 2023:
- Modified the right side plate with a collar to support the driving pin.
- Modified the axle with new geometry and different external diameters. It turns out that the paper cores of the music rolls might be differently worn out. The outer diameter can be found in the file name.