The Miami (PCB Vice)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a nice simple PCB Vice that does not take up a lot of space. It does not need a huge print bed.
- Ocena
- 4,833 / 5
- Polubienia
- 36
- Pobrania
- 311
- Wydruki
- 7
- Wyświetlenia
- 1628
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a nice simple PCB Vice that does take up a lot of space. It does not need a huge print bed so should fit on most printers.
I have included a tall version but in all honesty thing this would be overkill, it would allow you to get a lot of ballast in there to weigh it down though.
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20
Filament: eSun PLA Pink
Notes:
The print took approx 10 hrs and i printed at 0.2mm, it could be a good idea to do the majority of the prints at 0.3mm then 0.2mm for the threads part to maintain the detail.
Category: Electronics