1 / 4
Herman Miller Flo Monitor Mount Puck
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement puck for monitor mount.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 276
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement part for the Herman Miller Flo monitor arm. This piece interfaces with the underside of the desk that the mount clamps to.
Highlighted in the picture.
Printed at 100% infill, two walls.
THIS IS AN EXPERIMENTAL PART, use at your own risk.
10/10/23 - Tested the part, it appears to be holding up fine so far.