Large Lego Technic Clock - Glueable Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of lego technic clock to allow for super gluing parts together instead of using magnets. Also changed wall mount.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 298
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the command hool I used: https://a.co/d/bffJU8T
Here is the clock mechanism I used: https://a.co/d/iCVBAwC
Download the number files from the original model.
Tolerances on all parts are not very good (too tight on gears and too loose on numbers). I used a Dremel to make the spot for the clock mechanism larger and used extra superglue on the numbers to keep them together.
For the glue to hold the best, I recommend using 80-120 grit sandpaper on the sides of the gear pieces to have a flat rough surface.
I got a nice friction fit with the clock mechanism, but if yours ends up too loose, just put some velcro on the back for easy battery changes.
Fun fact: WD 40 works surprisingly well to remove the white haze left on the part by super glue.