Large Lego Technic Clock - Glueable Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of lego technic clock to allow for super gluing parts together instead of using magnets. Also changed wall mount.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 27
- Makes
- 0
- Views
- 298
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This is the command hool I used: https://a.co/d/bffJU8T
Here is the clock mechanism I used: https://a.co/d/iCVBAwC
Download the number files from the original model.
Tolerances on all parts are not very good (too tight on gears and too loose on numbers). I used a Dremel to make the spot for the clock mechanism larger and used extra superglue on the numbers to keep them together.
For the glue to hold the best, I recommend using 80-120 grit sandpaper on the sides of the gear pieces to have a flat rough surface.
I got a nice friction fit with the clock mechanism, but if yours ends up too loose, just put some velcro on the back for easy battery changes.
Fun fact: WD 40 works surprisingly well to remove the white haze left on the part by super glue.