1 / 4
Carmageddon Red Eagle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
This car is based on a 3D model from Carmageddon (1997) and https://www.thingiverse.com/thing:2886047. But all parts are recreated from scratch.
Errata
- Bumper connectors are too thick comparing to the holes. Front and rear bumpers. The holes have an inside angle down. All solved by little work with a knife.
- A hanging part over the windshield is 1 layer thin. Just be careful.
- The windshield can be thicker to fight against overhanging. It was printed with semitransparent PETG - bottom layers not sticking to each other really well. May survive only a few installations.