1 / 4
Carmageddon Red Eagle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution
This car is based on a 3D model from Carmageddon (1997) and https://www.thingiverse.com/thing:2886047. But all parts are recreated from scratch.
Errata
- Bumper connectors are too thick comparing to the holes. Front and rear bumpers. The holes have an inside angle down. All solved by little work with a knife.
- A hanging part over the windshield is 1 layer thin. Just be careful.
- The windshield can be thicker to fight against overhanging. It was printed with semitransparent PETG - bottom layers not sticking to each other really well. May survive only a few installations.