Rebate & Dado Markout tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cabinet markout tool for 17mm marine/form work Plywood
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a first version of the tool.
I designed this tool for marking out the dados and rebates of a shelving cabinet I need to build using 17mm plywood boards.
The intention is to be able to use this in the same manner as a speed square, both left & right handed, and to mark out lengths and widths, butting the long side ends to the edge of the material gives you the reference point.
The total length is 100mm, the mark out steps have a 0.5mm clearance, ie;
- the first step is 9.5mm from the butt to give a 9mm rebate
- the second step 9mm wide by 8.5mm deep, to give an 8mm wide dado
I intend to add markings for the measurements and a second dado step for an additional reference point when marking out.