Rebate & Dado Markout tool
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.36 – €1.67 net (excluding VAT)
For file: CRX_Rebate_Dado_Markout_tool.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.51 excluding VAT (range midpoint).
- Weight reported by the author
- 23 g
- Print time reported by the author
- 1.32 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A cabinet markout tool for 17mm marine/form work Plywood
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 111
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a first version of the tool.
I designed this tool for marking out the dados and rebates of a shelving cabinet I need to build using 17mm plywood boards.
The intention is to be able to use this in the same manner as a speed square, both left & right handed, and to mark out lengths and widths, butting the long side ends to the edge of the material gives you the reference point.
The total length is 100mm, the mark out steps have a 0.5mm clearance, ie;
- the first step is 9.5mm from the butt to give a 9mm rebate
- the second step 9mm wide by 8.5mm deep, to give an 8mm wide dado
I intend to add markings for the measurements and a second dado step for an additional reference point when marking out.