Tenere 700 handlebar mount for oxford grip heater
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
mounts your oxford grip heater controller to the bars
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 1003
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This model has different radius on the curve to fit the stock tenere bars snugly. You can slide it to make it tighter.
I have used it for sometime now and it's staying in place without ziptie.
I also added version with ziptie hole but I haven't printed or tested that version.
Print it on it's side so it's flexible and strong on the part that goes over the bars.
I used PETG. ASA/ABS and PA-CF would be ok aswell. PLA most likely will melt in the summer.
---Update June 2024---
I've used this for couple thousand kms in mostly summer but also during winter and it's working well. Printed in PETG