Large format secret drawer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had seen other secret drawer design, and wanted something bulkier that was a little harder to accidentally open.
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 108
- Wydruki
- 0
- Wyświetlenia
- 679
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
In this design, it was important that the shelf part doesn't easily detach or slide around, so I added a spot for magnets in the top and bottom part. I used little button magnets, 12 mm in diameter. I superglued them in place. For the top magnets, I printed supports in the holes, pulled them out with pliers, slotted in the magnets, then put the supports back in and superglued them in place for a little extra strength.
The holes are the only part that needed supports, so I blocked supports everywhere but there, and printed the flat sides down.
UPDATE:
My house was just burgled!
The people who did it ransacked everything, even took the batteries out of the smoke detectors. Hilariously, I had left some cash and a credit card in this secret drawer, and they didn't take it!
It actually works!!!!
Crazy.
Print Settings
- Printer brand: Prusa
- Printer: I3 MK3S
- Rafts: No
- Supports: Yes
- Resolution: 0.3 mm
- Infill: 20%
- Filament brand: 3D fillies
- Filament color: white
- Filament material: PLA