The Warden
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Exactly what it sounds like. (The upcoming scary minecraft mob)
- Ocena
- 4,8 / 5
- Polubienia
- 239
- Pobrania
- 1573
- Wydruki
- 11
- Wyświetlenia
- 12 681
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
My take on the upcoming Minecraft warden mob. I wanted as many different colors and details as possible, but since I don't have an MMU, I had to get creative with the design. The resulting print is pretty small (roughly 12.5 cm tall), and there are A LOT of parts, but the result is sick.
Special thanks to DEVU (u/DevuXD) for his texture recreation of the warden which helped me model the back of the warden.
This model is also available on Thingiverse: https://www.thingiverse.com/thing:4800632/files
Assembly should be pretty straight forward, but if not, the following pictures should provide hints:
Tools Required: precision knife to clean off parts for better fit. Super glue can be useful if you want a more permanent connection.
NOTE: Every single model (stl) needs printed at least 1x. But the following files need printed multiple times:
MiniLeg Blue MT.stl (2x)
Mini Leg.stl (2x)
Mini Toes MT.stl (2x)
Arm Pivot -.1.stl (2x)
Leg Hinge B type 2 -.127 lower and upper.stl (2x)
StoneRib MT -.1.stl (8x)
Mini Blue Rib.stl (2x)
ALSO: be careful with fragile parts especially in the Arm segments.
ALSOx2: this thing might be a pain to print . . . good luck
The Legs: note that Left and Right are not identical.
The body cover: small parts push from the inside to the outside.
The two feet are identical:
